Garden Sheds

All of our garden sheds are manufactured using the best quality Tongue & Groove timbers throughout. We offer a complete service for one price, so the price you see is the price you pay for delivery, installation,  treated timber, polyester roofing felt and toughen glass in your fixed windows if you choose to have them.

We offer two roof choices in our garden sheds, Apex or Pent.

Apex Roof.

  • Approximate hight at eaves 5ft 4inches
  • Height at centre of building increases with width
  • Door must be in the smallest part of the shed (i.e. in a 6×4 the door would be in the 4ft section where the apex is)
  • If you wish to have an Apex roof with the door in the long side, please see our HiPex Range.

 

Pent Roof.

  • Slopes from front to back
  • Height at front is approximately 6ft 6inches
  • Height at rear is approximately 6ft.
  • Please see diagram below for optional door positions on this roof choice.

Pent Door Style

  • Well Braced Single Access Door (approximately 2ft 6inches wide)
  • Superior Grade 12mm Finish Shiplap T&G Cladding (MERSEY RANGE)
  • Superior Grade 20mm T&G Gladding (HEAVY DUTY RANGE)
  • 38x50mm Finish Rounded Four Corner Framing 
  • Stylish Windows Can Be Fitted 
  • 12mm T&G Roof and Floor – NO OSB / Solid Sheet Board
L&W Mersey Range Heavy Duty L&W Mersey Range Heavy Duty
4×4 £ £ 8×6 £ £
5×4 £ £ 8×8 £ £
6×4 £ £ 10×5 £ £
6×5 £ £ 10×6 £ £
6×6 £ £ 10×8 £ £
7×4 £ £ 12×5 £ £
7×5 £ £ 12×6 £ £
7×6 £ 12×8 £ £
8×4 £ 14×6 £ £
8×5 £ 14×8

All sizes quoted are ROOF and not FLOOR sizes. 
For approximate dimensions of your chosen building, please ask for details.
ALL BUILDINGS REQUIRE A SOLID LEVEL BASE TO BE INSTALLED ON.
All buildings are pre treated, we recommend that you treat your building annually once installed.