The Apex Mersey Range garden shed is one of Merseyside Sheds most popular choice, with a fully tongue and groove construction (including roof and floor) as well as coming with quality fixtures and fittings it is by far more than your ‘standard’ shed.
|Cladding Material||Shiplap||Cladding Thickness||12mm|
|Framing Style||Standard||Framing Size||28x44mm rounded four corner|
|Roof Material||Tongue & Groove||Roof Thickness||12mm|
|Floor Material||Tongue & Groove||Floor Thickness||12mm|
|Door Style||Standard Single||Door Size||2ft 6inches – upgrades available|
|Window Style||Standard Fixed – opening available||Window Size||18inch x 24inch|
|Glazing Thickness||3mm||Glazing Material||Toughened Glass|
|Roof Covering||Polyester Shed Felt||Treatment||Red Cedar Water Based|
|Locking System||Hasp and Staple||Material||Selected European Softwoods|
Height at eaves 5ft 4inches with the height of apex increasing with width.
Door must be in the smallest part of the shed (i.e. in a 6×4 the door would be in the 4ft section where the apex is). If you require more headroom or an Apex roof with the door on the longest section, please click here.
All sizes quoted are ROOF and not FLOOR sizes.
For approximate dimensions of your chosen building, please ask for details.
When ordering a building 8×8 or larger it is imperative to ensure you have 8ft height clearance from where our vehicle can park to the base upon installation, if this is not the case – you must ensure this is mentioned before or on your order so the necessary alterations can be made. Failure to inform us could result in your building being delivered only and should a revisit be required to commence installation, a charge will apply.
For full details, please see our Terms & Conditions.